-
Touch screen display touch failure or not how to do
Touch display contact failure or not, please try to use the system comes with a calibration tool calibration of the touch screen, touch win7 system calibration methods have been most commonly used for example: control panel - hardware and sound -Tablet PC settings - Calibration of touch, in accordance with the system instructions.
-
Analysis and solution of pressure sense of pressure sensitive pen
A board, I had a problem, it is from it all the way to draw up, click can not become a good, sensitive ah!"
In the painter8 test, and not the same as before. Before you have to come into contact with the traces of the board to draw up. But now it is far away from the board, the appearance of a centimeter, it is recorded"
"As long as the head refers to the board (not met, 5~6 mm) board have reflected. The arrow on the screen. If something is written about pressed on the board does not loose it.
Two, pen or pen eraser pen or pen eraser led to tight, activities are not flexible, if there is a foreign body into the pressure sensitive pen, LED pen point and a pen eraser activity is not flexible, it will cause a pressure always being.
Solution: the cartridge to pull out, and then gently plug back, should be able to easily insert the cartridge, if very tight, there may be too thick or the pen refill opening is too small. A pen eraser can also be very easy to turn on.
(please note: Litu and number of pen pressure Bibi core can not be replaced, not according to the instructions)
Three, there is a problem with the pressure sensitive capacitance of the pressure sensitive pen or the problem of setting the hardware parameters of the pen
Solution: return only painted company maintenance and replacement, please contact will complete the warranty card and the purchase invoice Yubi send together company painted warranty. Do not dismantle the pen, so as not to lose the warranty rights.
-
How do I change the pen, are worn out, and where you can buy accessories
Pressure sensitive pen refill, the replacement is very simple, you only need to use a knife, gently pressing the tip part of white, gently pulled out can be installed; refill it, just put the standard cartridge can be inserted from the front of the single! You need to pay attention to buy buy accessories models. You can visit the company's home page in the "support" click "spare parts".
-
How to adjust the handwriting screen
Answer: driving double-click the icon in the lower right corner of the screen, open the driver settings, select correction page, check the coordinate correction options, click the 4 point or 9 point correction. Correction pop-up window, with your usual posture by clicking the calibration point, end point after point "OK", save the calibration setting
-
Method for judging whether the hardware has a problem
The most simple and effective detection method is to test the other received tablet computer, if the other computer is normal, you can think the tablet hardware is no problem, the fault is in the driver, operating system, application or other electromagnetic interference.
B. will be digitally connected to the computer USB port, digital dial lights should be lit, in the case of not installing the driver, to see if the pressure pen can be used as a mouse
The effective area of C. will pull into the digital pen, pen / pencil eraser or under the pressure side of the switch, the indicator light color tablet. If you meet the above points, so usually digital hardware should be no problem. Pull
-
How do I register my product? The serial number of the product is over there
You can log on to the company's home page www.huiyou.com in "service support" click "register your digital board"
The registration of the digital board; the serial number of the product in the product packaging, warranty card and the back of the digital board will have three serial number should be consistent (Model number for the product model, S/N number for the product serial number)
-
After a period of time, covering the digital board will have scratches. How to prevent this situation
Please replace the pen in a timely manner, because it may be due to wear edge becomes too sharp, especially with very frequent are more likely to have this phenomenon. The sharp edge of the tip may damage the number plate cover film. In addition, due to the long time use will cause normal wear, can best be replaced. Please note that the cover film, nib and the film belongs to consumables, not free warranty. If you need to replace the pen or cover film, you can on the website of the center parts ordering, can always contact the local dealer.
-
Win2000/xp/2003 system operation
My computer - tools - Folder Options - View - will show all files and folders selected, the "hidden file type extension" to remove the selection
-
Win98 system operation
My computer - View - Folder Options - View - "show all files" selected, "hide the known file type extensions" remove the selection
-
Why can't my driver install?
Possible reasons
1, a hardware failure, please check the digital indicator board is bright, if not bright, please check whether the USB interface can provide +5V, whether the USB power supply shortage, or use the extended line of data transmission caused by bad. Of course, there may be a fault. The tablet itself can change the computer to try.
2, system software failure, when the tablet computer access, computer detects hardware, but the installation of the driver that can not find the tablet. Please open the control panel equipment management system, the figure below shows the difference between digital and digital plate installed before installation of the board, if the system does not detect the human body input device, is that when the system installed is not installed, or the system is used for piracy, and the version is too low. Please reinstall the system solution or call the technical department of the Wacom company.
3, the fault caused other programs. When driving in the installation of digital plate, there are other prompt system tablet driver, or install driver, control panel icon in the WACOM tablet opened Baocuo, that can not find tablet driver. The reason is the tablet computer before installation of other models or any other brands. The solution is very simple, please refer to <1, a pressure sensitive pen has pressure phenomenon analysis and Solution > manually uninstall the driver steps to solution of the above problem.